Home / Motorsport / Ford Racing R125 Mustang: 360hp 1966 Fastback Celebrates 125 Years of Ford Motorsport

Ford Racing R125 Mustang: 360hp 1966 Fastback Celebrates 125 Years of Ford Motorsport

Cars on Road During Race

Ford Racing existed before Ford Motor Company did. That is the neat, slightly improbable fact sitting underneath the R125 Mustang, a one-off 1966 fastback built to mark 125 years of Ford motorsport and unveiled at SEMA in Las Vegas. It is a heritage project, plainly, but it is also a statement about how Ford wants its racing arm to be seen: approachable, hands-on and rooted in the parts catalogue rather than in a seven-figure show stand.

The R125 is not a hypercar-chasing restomod. It is a restored 1966 Mustang fastback reworked with Ford Racing Parts, and Ford’s own framing is deliberately plain: racing is in our DNA. After a period in which Ford’s performance story has been told through electrified SUVs and limited-run specials, a gold-striped old fastback with a stroker V8 and a five-speed manual makes a different kind of argument.

Ford Racing’s 125th anniversary: why the story starts in 1901

The anniversary does not date from the founding of Ford Motor Company in 1903. It dates from a race two years earlier. In 1901 Henry Ford built and raced his own car, winning a motor vehicle race at Grosse Pointe, Michigan. That victory mattered far beyond the trophy: it helped secure the financing that would eventually create Ford Motor Company.

Put simply, the company exists in part because its founder won a race first. That is the story the R125 is built to tell, and it explains why the car wears Ford Racing branding rather than a Shelby badge or a modern performance sub-brand. The motorsport operation is the older entity here, and Ford is leaning into that chronology.

347 stroker engine: 5.7 litres, 360bhp and modern fuel injection

The engine is the heart of the build and the clearest signal of its philosophy. Ford has fitted a 347-cubic-inch stroker version of its classic small-block V8, a 5.7-litre unit. It uses a Boss 302-style block with aluminium cylinder heads, fed by Edelbrock Pro-Flo electronic fuel injection.

Ford quotes 360bhp and 400lb ft of torque. Those are not numbers designed to start arguments at a weekend meet. They are numbers designed to be used. A naturally aspirated V8 of that capacity, running modern engine management, should start on the button, idle in traffic and pull cleanly from low revs in a way that a carburetted period engine simply would not.

It also sits in interesting contrast to where the Mustang has gone in 2025. The current halo car, the Ford Mustang Dark Horse SC: 795bhp Supercharged V8 Is Ford’s New Halo Pony Car, makes more than double the power. The R125 is a reminder that Ford’s performance heritage was built on modest, tunable V8s long before it was built on superchargers.

TREMEC TKX five-speed: a gearbox chosen for packaging

The gearbox is arguably the most telling detail of the whole build. Ford chose a TREMEC TKX 600 five-speed manual, and the reason given is packaging. It is more compact than a six-speed swap and, according to Ford, needs “very minimal floor pan modifications” to fit.

That is not the language of a show car. A concours build would hide its engineering; a restomod with a huge budget would cut the tunnel about and fit whatever gearbox suited the spec sheet. Choosing a transmission because it drops into an original shell with minimal surgery is a decision made by people who intend the car to be driven and, potentially, to be copied.

The same logic applies to the valve covers. The R125 uses a two-piece design with interchangeable covers and integrated spark plug wire looms. It is a patented arrangement that has been common on Ford’s Modular and Coyote V8s since the early 1990s, but it has not previously appeared on a small-block Ford. The benefit is straightforward: easier servicing, with the wires routed and protected rather than draped across hot metal.

Black, gold and a suitcase where the rear seats used to be

The livery is unapologetically period motorsport. Black paint carries gold and red graphics: a bright red stripe across the rear and bumper, gold Ford Racing lettering, and gold roundels on the doors bearing an R125 Ford Racing logo. The wheels are gold to match the exterior accents.

Ford has not released detailed interior photography, which is unusual for a SEMA build. One published image shows a subtle gold roll cage and, where the rear seats would normally sit, a brown leather suitcase. It is a charming touch, somewhere between a period rally car’s luggage strapped into the back and a deliberate two-seater conversion.

A rebrand, a return to Le Mans, and a template for affordable performance

The R125 lands at a moment when Ford’s racing identity is being deliberately reshaped. CEO Jim Farley has driven the brand’s motorsport push since 2020, rebranding Ford Performance as Ford Racing last year and playing a central role in Ford’s return to Formula 1 and its forthcoming LMDh prototype, which is due to contest next year’s FIA World Endurance Championship.

That is a serious, expensive, global programme. The R125 is the other half of the message: that Ford Racing is not only about prototypes and grand prix weekends, but about the parts that have kept old Fords on the road and on track for decades. It is a reminder that the racing arm’s credibility was never built on hypercars. It was built on parts that people could afford, fit and race.

Hagerty’s read on the build is that the parts choices suit lower budgets and daily-driven use, offering strong performance without the spiralling asking prices that now attach to many show cars and restomods. That is a fair assessment. The restomod market has spent the past decade climbing towards six figures and beyond, with builds like the Audacious Automotive IV: £350,000 V8 restomod channels Sport Quattro showing just how far the ceiling has moved. A factory-backed 1966 fastback with an off-the-shelf stroker, a crate gearbox and a sensible EFI kit points in the opposite direction.

One thing worth stating plainly: the R125 is a US show build, and whether Ford Racing Parts can be ordered here, and at what price, is a separate question from the car itself.

We covered ford mustang gtd 815hp in more detail elsewhere.

Tagged:

Leave a Reply

Your email address will not be published. Required fields are marked *